Home

Journal Introduction

Instructions for Authors

Subscribe Guide

Open Access Statement

Publishing Ethical Statements

Search By
Display by issue	Display by category

Article No.

English Title

Authors

Vol. Issue No.

Copy

NO.1
20210101	Rydberg-Atoms-Based Microwave Electric Field Sensing	白金海，胡栋，贡昊，王宇	2021,(1):-
20210102	The Accurate Robot Pose Measurement Based on Multi Base Station Laser Tracker	陈章位1 ，祖洪飞2，洪伟3，毛晨涛4	2021,(1):-
20210103	Application of Datum Conversion Standard Board in Multi-system Integration Measurement	乔磊，孙安斌，王继虎，曹铁泽	2021,(1):-
20210104	Research on Thermal Resistance Correction Model of Thin Film Thermocouple Based on CFD Technology	王玉芳，常蕾	2021,(1):-
20210105	The process of the Measurement Data of Non-contact Grind-Fineness-Gage Measuring-Device	金挺，陈挺	2021,(1):-
20210106	Study on Modal Mass Measuring Method	杨正玺1, 常洪振2	2021,(1):-
20210107	Gas Impulse Pressure Generation Method Based on Outlet Modulation	张鹤宇1, 李博1, 杨军1	2021,(1):-
20210108	Technical Research on Sinusoidal Pressure Generation of Bellows	李天然 , 王洪博	2021,(1):-
20210109	Tuning Fork AFM Probe Circuit System Based on PLL	李暄妍1，张富强1，陈晓梅3，高超2,3	2021,(1):-
20210110	The Design and Research of the Spiral Spring Used for Rotational Inertia Measurement	仝哲旭，彭军	2021,(1):-
20210111	A Brief Analysis of the Construction of the Quality Management System for Calibration Proficiency Testing Providers	张溯，徐永	2021,(1):-
20210112	封面目录		2021,(1):-
20210113	2021-1-全册		2021,(1):-

NO.2
20210201	Several Primary Problems in the Development of Dynamic Metrology	杨军, 张力, 李新良	2021,(2):-
20210202	Review of Engineering Atomic Gravimeter	白金海，胡栋，贡昊，王宇	2021,(2):-
20210203	Present Situation and Development Trend of Geometric Digital Measurement Method and Measuring Equipment	何学军	2021,(2):-
20210204	Technological Development Trends of Geometric Dimension Measurements of Large Parts in the High-end Equipment	孙安斌，曹铁泽，王继虎，甘晓川，高廷	2021,(2):-
20210205	Discussion on Measurement and Metrology assurance System of Aero-engine Blade Geometry Parameters	何小妹，刘峻峰，何学军，张学仪	2021,(2):-
20210206	Review on the Measurement and Metrology Methods of Residual Stress	王辰辰	2021,(2):-
20210207	Research Status and Prospect of Transient High Speed Photon Doppler Velocimetry	吕林杰，武腾飞*，韩继博，夏传青，张大治，梁志国	2021,(2):-
20210208	Angular Motion Measurment and Calibration Method	彭军	2021,(2):-
20210209	Status of metrological evaluation for autonomous navigation of wheeled mobile robot	姜延欢, 杨永军, 李新良, 吴娅辉, 刘渊，田森	2021,(2):-
20210210	An Improved Method for Determining Nanoindentation Area Function	李强，任冬梅，万宇	2021,(2):-
20210211	Preliminary Study on Numerical Calibration of Virtual Wind Tunnel of Airflow Temperature Sensor Based on CFD Technology	王玉芳，赵俭	2021,(2):-
20210212	Unattended Intelligent Rockwell Hardness Testing Platform	石伟, 陈诗琳，陶继增	2021,(2):-
20210213	Development and Application of Torque / Power Standard Device	秦海峰, 王磊, 王晶露	2021,(2):-
20210214	Design of New Lever Support System for Torque Standard Machine	杨仁杰1,2 , 秦海峰2 , 王磊2	2021,(2):-
20210215	The Design of 270V aircraft DC Distortion Standard Signal Source Based on DDWS Technology	侯毅，柴艳丽，程勤	2021,(2):-
20210216	More Attention Should Be Paid to Dynamic Calibration Technology for Transducers	周宁	2021,(2):-
20210217	Discussion on Building a Navigation and Positioning System Based on Mobile Communication Networks	梁志国	2021,(2):-
20210218	Research of Air-Borne High Sound Pressure Calibration by Laser Piston Method	张炳毅，付强，郑爱建，徐佳	2021,(2):-
20210219	Application of High-end Length Measuring Instrument Design Principles to Step Gauge Calibration	孙玉玖，孙安斌，钱丰，邹晓喻	2021,(2):-
20210220	Research on Frequency Domain Calibration Technology of Impact Acceleration Sensors	曹亦庆	2021,(2):-
20210221	Simulation of Pulsating Flow Measurement based on Double Differential Pressure	张永胜, 刘彦军，于小丽	2021,(2):-
20210222	Research on Dynamic Calibration of Pressure Measurement System with Pressure Pipe	李博1, 杨军1, 张鹤宇1, 谢兴娟1, 龚铮2	2021,(2):-
20210223	Recovery Characteristic Calibration of Several Typical Temperature Sensors under Transonic and Supersonic Conditions	赵俭，王鹏，刘琳琳	2021,(2):-
20210224	Establishment of Gas Flow Calibration Facility to p.V.T.t Technique	王鹏, 张永胜，赵玉婷	2021,(2):-
20210225	Research on Dynamic Calibration of Aeroengine Surge-Measurement System	蔡菁	2021,(2):-
20210226	Research on the Calibrating Device for High Precision and Low Impact Acceleration	孙浩琳，张大治	2021,(2):-
20210227	Design and Development of Micro Pressure Standard Device	李鑫武	2021,(2):-
20210228	Research on Calibration Technology of the Test System for Civil Aircraft Variable Frequency AC Power Supply Characteristic	王文健，王建强	2021,(2):-
20210229	Study on Surface Microphone Calibration Technology	付强	2021,(2):-
20210230	Uncertainty Analysis of Rotor Balance In-situ Calibration	汤斌1,肖彬1,张文静2,王建强1	2021,(2):-
20210231	封面目录		2021,(2):-

NO.3
20210301	Development status and trend of industrial robot calibration technology and compensation method	宫思远, 赵子越* ,刘倩頔	2021,(3):-
20210302	Statistical Calculation Method of Conversion Efficiency of NOx Analyzer	詹彬彬1，万蕾2	2021,(3):-
20210303	Asymmetry Coefficient Errors of Accelerometer under Overload Vibration Environment	关伟	2021,(3):-
20210304	Numerical Simulation of Measurement of Temperature Uniformity in Vacuum Furnace	刘明君, 赵学师	2021,(3):-
20210305	Development of Sinusoidal Force Calibration Device	田峰，尹肖，李博，陈伟	2021,(3):-
20210306	High Temperature Optical Fiber Pressure Sensor Based on CO2 Laser Welding	张慧君1, 隋广慧1	2021,(3):-
20210307	Development of High Dew Point Humidity Standard Generator	胡艳青1, 柴塬1，陈洁新1，刘嘉2，聂晶3，白雪松3	2021,(3):-
20210308	Research on Key Technology of Five-degree-of-freedom Motion Error Measurement System	张忠宁，宋治崑，范宇超，范光照，娄志峰	2021,(3):-
20210309	Research on pulse dynamic pressure tracing method	史博，杨军，蔡菁，王辰辰，李程	2021,(3):-
20210310	Research on Online Calibration Method of I-V Curve Tester	张楠	2021,(3):-
20210311	Application of Laser Interferometer in the Measurement of Micro Gas Flow	赵玉婷, 杨松涛, 张永胜, 于华伟	2021,(3):-
20210312	How to Prepare for Accreditation of Calibration and Test Laboratory	付莉，刘明波	2021,(3):-
20210313	封面目录		2021,(3):-

NO.4
20210401	The Discussion abouton Synchronous Sampling of Multi-channel Synchronous Data Acquisition	梁志国刘渊尹肖孙浩琳张大治	2021,(4):-
20210402	Research Progress of Chip Scale Atomic Clock	刘雅丽，李维，武腾飞，李新良	2021,(4):-
20210403	Study on the Quality of Aerodynamic Flow Field for Enclosed Turbofan/Turbojet Engine Test Cells	刘琳琳，王毅，常蕾	2021,(4):-
20210404	Recognition and Judgment of Simultaneous Sampling Condition of Sine Wave	梁志国	2021,(4):-
20210405	Improvement of Bundle Adjustment in Multiocular Vision Measurement Systems	别梓钒，张瑞，李维诗	2021,(4):-
20210406	The Design of Angle Encoder Signal Real- Ttime Acquisition Based on RTX	任海燕，廖建平，肖述晗，吴帅，尹晓丽	2021,(4):-
20210407	Development of a verificaCalibration dDevice for lLaser tTarget sSimulator	王俊，朱小平，毛宏宇，翟树峰，张孟月, 徐钰华	2021,(4):-
20210408	Research on Control Principle and Verification Method of Automatic Standard Pressure Generator	罗昶1 ，闫晋平2，姚晓东2，郭建成2，刘朝彤2	2021,(4):-
20210409	Design and Analysis of High Accuracy Centroid Measurement System	李楠，骆旭，王丽，赵静	2021,(4):-
20210410	Research on cCentrifugal vVibration cCompound cCalibration tTechnology	董雪明，王敏林	2021,(4):-
20210411	Key Problems of Calibrating Multi-parameter Testing Equipment for Inertial Devices	关伟	2021,(4):-
20210412	封面		2021,(4):-
20210413	目录		2021,(4):-

NO.5
20210501	The Sensors and Measurement Technology for Assembly of Miniature Devices	王晓东	2021,(5):-
20210502	Bio-inspired polarization detection technology and navigation sensor applications	褚金奎,张钟元,张然,于灏,尉达	2021,(5):-
20210503	Passive Laser Tracking Measurement Method and Error Compensation Technology	娄志峰，耿万佳,张记云，林钰琪，范光照，王晓东	2021,(5):-
20210504	Technique of Measuring Multi-degree-of-freedom Geometric Motion Errors of Linear Stages	蔡引娣1,2, 王路辉2, 高英豪2，范光照1,2	2021,(5):-
20210505	The Increasement Relationship and its Application of three tooth thickness parameters of Cylindrical gear	锁刘佳，王立鼎	2021,(5):-
20210506	Measuring Method and System for Closing and Creeping of Switch Rail	翟文革1, 郑培珍2, 江海川2, 任同群2*	2021,(5):-
20210507	Application of Quaternion-based Three-channel Joint Transmissibility in Structural State Detection	任同群1,2, 郑培珍2, 徐征1,2, 王晓东1,2	2021,(5):-
20210508	Laser technology in precision measurement and manufacturing	乔晓旭1，罗怡1,2，王晓东1,2	2021,(5):-
20210509	Research Progress on Micro-transferring of High-viscosity Liquid	徐征，钱艳文，秦少春，王晓东	2021,(5):-
20210510	Technologies for the Flexibility of Precision Micro / Small Assembly Systems	王晓东, 张志勇	2021,(5):-
20210511	Research on Gas Pressure Measurement Technology Based on TDLAS Direct Absorption Method	张博涵1，杨军1，魏伟2，谢兴娟1，张大治1，姜延欢1	2021,(5):-
20210512	Reliability Evaluation of Flow Measurement System for Liquid Rocket Engine Test	杨懿，郭亚男，王永鹏，贾志杰，陈文丽，吕守国，吉喆	2021,(5):-
20210513	Overview of Pointer Pressure Gauge Intelligent Verification	门平1，毕俊杰2，古兆兵3，田桂东4，卫恒5，吴玲媛1	2021,(5):-
20210514	封面		2021,(5):-
20210515	目录		2021,(5):-

NO.6
20210601	Graphene-Based Resonators for Micro-Mass Sensing	肖行1, 樊尚春1,2	2021,(6):-
20210602	Current Studying Status and Developing Review of Acoustic Thermometry	赵乂鋆，赵俭	2021,(6):-
20210603	Feature Recognition and Quantitative Characterization of A Typical Sampling Faults in Data Acquisition Systems	梁志国	2021,(6):-
20210604	Research on the parameterized computing platform of high altitude cabin exhaust system	王玉芳1，苏金友2，张宏明3，赵浩2	2021,(6):-
20210605	Design of Standard Heat Source for Calibration of Nuclear Battery Thermal Power Measurement Device	高祎1，寇琼月2，张灏1，唐亚曼1	2021,(6):-
20210606	Measurement of Polarizer Optical Properties Based on Stokes Vector Analysis	步海军1,2，黎俊1,2，夏燕1，汤坤1,2，王攀1,2，曾婷婷1,2，江铖1，闵林1,2	2021,(6):-
20210607	Automatic calibration system for the target board of aircraft landing taxi light based on laser ranging	夏清鹰, 钟学敏,任培武,龙良刚, 李卓隆,朱杰	2021,(6):-
20210608	Study on Enhance Natural Frequency of Four-column Force Sensor	吕浩然1, 赵印明1 , 王敏宁2，黎永前2	2021,(6):-
20210609	CO2 Gas Pressure Measurement Based on Laser Interferometry	张博涵，杨军，谢兴娟，张大治，姜延欢	2021,(6):-
20210610	Research on Measurement Method of CAN Bus Carrier Listening Point	肖彬	2021,(6):-
20210611	Research on the Deviation Correction of the Measuring Beam Under the Impact of the Projectile	田森, 段小艳, 张大治, 李新良, 贾志婷, 姜延欢	2021,(6):-
20210612	Implementation and Verification of Calibration Methods for Aircraft 270V DC Power Supply Characteristic	王建强	2021,(6):-
20210613	封面		2021,(6):-
20210614	目录		2021,(6):-