Home

Journal Introduction

Instructions for Authors

Subscribe Guide

Open Access Statement

Publishing Ethical Statements

Search By
Display by issue	Display by category

Article No.

English Title

Authors

Vol. Issue No.

Copy

NO.1
20150101	The Approaches and Development of the Micro Flow Measurement	胡纯,樊尚春,郑德智	2015,35(1):-
20150102	Dynamic Temperature Measurement and Calibration Technology	王毅,赵俭	2015,35(1):-
20150103	Decoupling Control Research of Double-level Air Current Field	何畔,孟晓风	2015,35(1):-
20150104	Print Defects Detection Based on an Edge-and-Non-Edge Separation Processing Algorithm	马鹏,韩震宇,邹龙飞,兰云	2015,35(1):-
20150105	Design of Laser Tracking Measurement Visualization Software Based on VTK	张润宇,李月强,张滋黎,袁江,周维虎	2015,35(1):-
20150106	Realization of Calibration System for Testing Instruments on Load Box of Instrument Transformers Based on Visual Basic	张杰梁,赵斯衎,董小龙,黄洪	2015,35(1):-
20150107	Analysis of the Low Pass Filter’s Application in Shock Acceleration Calibration	贾秋燕,盛侃	2015,35(1):-
20150108	Research on Calibration Methods of Bath Blackbody Source	董磊,蔡静,孟苏	2015,35(1):-
20150109	Auto Calibration and Measurement Uncertainty of Quiet Zone Reflectivity Level of Microwave Anechoic Chambers	张恒萍,朱传焕,唐君	2015,35(1):-
20150110	A Measurement Method for Median Voltage and Open Circuit Voltage of Meggers	李涛,高博,张华锋	2015,35(1):-
20150111	Study on the Measurement of Linear Expansion Coefficient of Fiber Loop and Its Skeleton	高涵,陈亮,韩正英,金尚忠	2015,35(1):-
20150112	Measurement Methods of Current Ripples and Noises of DC Power Supplies	伍平英,王建立	2015,35(1):-
20150113	Discussion of Calibration Method of Industrial Type S Thermocouple Above 1100℃Temperature Point	赵楠,吴方,刘丹英	2015,35(1):-
20150114	Indirect Evaluation of Uncertainty in Measurement of Brinell Hardness Standard Blocks	黄开志,刘学明	2015,35(1):-
20150115	Solutions on On-Site Shift Inspection of Torque Wrench	张荣	2015,35(1):-
20150116	Atomic Fluorescence Spectrophotometer Calibration Common Problems	童诚,吴银银,马文	2015,35(1):-
20150117	Verification and Discussion on Conformation of Laboratory Technical Capacity with Standard Methods	许明华	2015,35(1):-

NO.2
20150201	High Gas Temperature Measuring Technology Based on CARS	赵俭	2015,35(2):-
20150202	Review of the Calibration Technique for Dynamic Force	尹肖,王宇,杨军	2015,35(2):-
20150203	Flight Data Abnormity Detection Method Based on Sparse Auto-encoder	杜辰飞,曲建岭,孙文柱,高峰	2015,35(2):-
20150204	Centrifugal-temperature Composite Chamber Temperature Precision Control Method	李颖奇,孟晓风,董雪明	2015,35(2):-
20150205	A Focusing and Scanning System Applied in Laser Vibrometers	娄鑫鑫,李华丰	2015,35(2):-
20150206	Centrifugal Detection Device for Overload Accelerometers	尹晓丽,常欢,聂振华,于亚云,秦朝俊	2015,35(2):-
20150207	Design of Auto Test Equipment for Plane Light Alarm System	张凯,姜静,刘迪	2015,35(2):-
20150208	Design and Application of Measurement System of Large Current	张建永,贾云涛,胡耀元,岳伟,张胜强	2015,35(2):-
20150209	Automatic Calibration Software of Signal Generator Based on VEE	孙静,刘晨,林升,韩利华,梁法国,邵强	2015,35(2):-
20150210	Discussion on Measuring a Flexible Cable with 1-port Calibration Method and 2-port Calibration Method by Using Network Analyzer	严瑾,蔡小宏,王春林	2015,35(2):-
20150211	Dynamic Calibration of Sensitivity of Angular Motion Transducers	孙丰甲,彭军,何群,郭建麟	2015,35(2):-
20150212	Study on Calibration of the Reference Wall for the Crash-test Measurement System	陆佳艳,许静,瞿剑苏,曹铁泽,甘晓川	2015,35(2):-
20150213	Thermoelectric Properties and Application Research of IrRh40-IrRh10 Thermocouples	刘丹英,张贺,吕国义	2015,35(2):-
20150214	Online Quality Detection Research For Electronic Connectors	邹龙飞,韩震宇,马鹏,兰云	2015,35(2):-
20150215	Uncertainty Analysis for Reference Material of Erythrocyte Sedimentation Rate	孙荣荣,丁敏,顾玮然,陆逊,肖瑶,王鹏德	2015,35(2):-
20150216	Evaluation of Measurement Uncertainty for Nitrided Case Depth with Hardness Method	刘松	2015,35(2):-
20150217	Knowledge and Thought on the Service Quality on Metrology Industry	韩义中	2015,35(2):-
20150218	Analysis of Error Source of Humidity Sensors’ Proficiency Testing	王传博,贺胜	2015,35(2):-
20150219	Study on Properties of Precision Dew Point Hygrometer Standard Device and Software Design for Measurement	贾军伟,李绍飞,柴昊,张书锋,刘展,卢茂	2015,35(2):-

NO.3
20150301	Development of Dynamic Metrology in Europe	杨军,梁志国,燕虎,尹肖,李博	2015,35(3):-
20150302	Analysis and Comparison of Pulse Current Measurement	张建永,胡耀元,贾云涛,岳伟,张胜强	2015,35(3):-
20150303	The Structure Design for Multi-Component Loading Calibration Device	秦海峰	2015,35(3):-
20150304	Atom Loss Caused by Raman Frequency Shift in Atom Interferometry	李超辰,王宇,武腾飞,茹宁,季俊云	2015,35(3):-
20150305	LS-SVM Based Optimal Setting of Reagent Dosage for Flotation	张新林	2015,35(3):-
20150306	Posture Variable One-dimension Platform	李华丰,朱振宇,兰一兵,李强,王霁	2015,35(3):-
20150307	Development of a Vertical High Temperature Furnace with Three Homogeneous Heating Sections	杨新圆,刘裕盛,陈炜	2015,35(3):-
20150308	Bonding Test of Carbon Fibers by Ultrasonic	徐浪,潘勤学,王超,顾军,伍建雄,刘金峰	2015,35(3):-
20150309	Design of Back-pressure Balanced Liquid Pressure Regulator and Test Method	彭轶,盛晓岩,李鑫武	2015,35(3):-
20150310	Research of Vibration Measurement Experiment by Laser in High Temperature	徐佳,张炳毅	2015,35(3):-
20150311	Determination of the Location for Heat Flux Sensor Inside the Cavity Using In-Cavity Calibration Method	董磊,蔡静,杨永军	2015,35(3):-
20150312	Research on the Inspection Method of Electronic Connector Appearance Defects	郭羽鹏,韩震宇,邹龙飞	2015,35(3):-
20150313	Calibration of Positioning and Orientating Receiver	孙丰甲,彭军,何群,郭建麟,李娜娜	2015,35(3):-
20150314	Analysis and Reflection to the Problem of Thermocouple Quantity Transfer System Above 300℃	刘丹英,吕国义,张贺	2015,35(3):-
20150315	Metrology Information System Online Organization of Original Records and Automatic Generation of Certificates	韩义中	2015,35(3):-
20150316	Management System of Measurement Labels of US Navy	王瑞宝	2015,35(3):-
20150317	Measurement and Calibration Method of the Ash Fusibility Tester	江宁川,杨佳,王振国,韩瑞国	2015,35(3):-
20150318	Quality Control of the Measurement Standard in Wireless Metrology	王林林,周佳胜,宋晓婵,蔡进	2015,35(3):-

NO.4
20150401	智能制造时代的计量——云计量	张泽光,李少壮,李伟	2015,35(4):-
20150402	Study on Testing Technology of Navigation Terminal	王田,夏天,张书锋,陈强,彭明	2015,35(4):-
20150403	Thrust Calibration Technology of Areo Vector Engine Test Cell	王辰辰,李新良,李程,曾吾,王洪博,俞锦	2015,35(4):-
20150404	An Effective Modeling Approach to Improve Meter Accuracy	贾云涛,胡耀元,张建永,岳伟	2015,35(4):-
20150405	Pressure Working Condition Correction Method for Temperature Measuring Deviation Based on Reynolds Criterion	赵俭	2015,35(4):-
20150406	A Laser Based Straightness Measurement System for Tube Type Works	杨凯,李振华,徐胜男,王明昱	2015,35(4):-
20150407	163 fs Passively Mode-Locked Er3+ -doped Fiber Ring Laser	国佳帅,武腾飞,梁志国,赵春播,韩继博	2015,35(4):-
20150408	Primary Study on Preparation Method of the Seawater pH Standard Substance	石超英,王爱军,张晓慧,王聪,于小焱,赵宇梅,王宁	2015,35(4):-
20150409	2-D Dynamic Photoelectric Microscope	李华丰,王霁,朱振宇,兰一兵,李强	2015,35(4):-
20150410	Design of a Calibration Device for Wireless Pressure Acquisition Instruments	周四清,吴双双,曾麟,宋扬	2015,35(4):-
20150411	A Standard Rockwell Hardness Device with Intelligent Force-loading and Laser Measuring Technology	石伟,陶继增,王丽,李金颖,徐明	2015,35(4):-
20150412	Design of Software Cheat Monitoring System for Truck Scale	郭琳琳	2015,35(4):-
20150413	Research on Improving Testing System for the Water Flow of Aeroengine High-pressure Turbine Guide-vanes	蔡文波,李钊	2015,35(4):-
20150414	Study on Calibration Method of Gas Chromatography - Tandem Triple Quadrupole Mass Spectrometer Equipped with the Source of Electron Impact (EI)	何海红,韩文斌,王卫华,邵明武,靳松	2015,35(4):-
20150415	Calibration Test of Beidou Receivers Positioning	郭建麟,彭军,何群,孙丰甲,李娜娜	2015,35(4):-
20150416	Research on Calibration of Optical Electric Field Probes	张思敏,盛永鑫,田晓光	2015,35(4):-
20150417	Method for Determining Sheathed Noble Metal Thermocouple Measuring End Position	侯运安,赵雪茹,王兵利,苏剑	2015,35(4):-
20150418	Research of Calibration Method on Analog Resistance	倪有明	2015,35(4):-

NO.5
20150501	Platform of Measurement Industry Under “Internet+” ERA	李洪波,李伟,张泽光,李少壮	2015,35(5):-
20150502	Measurement Methods of Area Function for Nanoindentation Test	任冬梅,万宇,段小艳	2015,35(5):-
20150503	Curve-fit Method and Its Application of Four-Parameter Sine Wave with Partial Period	梁志国	2015,35(5):-
20150504	Aeroengine Novelty Detection Method Based on Online SVDD	周胜明,王小飞,高峰,曲建岭	2015,35(5):-
20150505	Analysis of Test Equipment Weight Impact on Composite Material Barrel Straightness Measurement Accuracy	宋珊珊,李剑峰,孙杰,冯忠彬	2015,35(5):-
20150506	Coupling Vibration Characteristics Analysis of Holistic Bladed Disk	孙浩琳,吴娅辉,朱振宇	2015,35(5):-
20150507	MATLAB-aid Design Method of Active Analog Filters	丁宇,薛开昶,孙伟	2015,35(5):-
20150508	Attitude Measurement System Design for UAV Airborne Loads	孙雨,李宝安,马骊群	2015,35(5):-
20150509	Design and Research on Controlling System for Balance Calibration	杜云龙,陈超,苗磊	2015,35(5):-
20150510	Research on Auto-test Equipment of Relay Boxes	王益,王彦蕾,高光波,曹龙,巴瑞章	2015,35(5):-
20150511	Study on Test Method of System on Chip for RNSS	夏天,刘英乾,杨文彬,王田	2015,35(5):-
20150512	Interaction Between Sonic Nozzles in Device	李鹏,暴冰,李春辉	2015,35(5):-
20150513	Analysis and Comparison of Measurement Method of the Effective Area of Pistons	李海兵,卓华,赵亿坤,陈武卿	2015,35(5):-
20150514	The Principle and Error Analysis of Measurement of Filter Rod and Cigarette Circumference by Laser Method	戴昕	2015,35(5):-
20150515	Special Test Equipment Calibration and Quality Management for Flight Test	张伟	2015,35(5):-
20150516	Analysis And Research For Measurement Function of Military Equipment Based On the MIL-STD-1839	董锁利,吕文琪	2015,35(5):-
20150517	Designand Implementation of a Digital Pressure Calibrator Based on Temperature Calibration	王卫华,刘春艳,肖雷	2015,35(5):-
20150518	Discussion on Calibration and Problems of Multifunction Process Calibrators	姜海飞	2015,35(5):-

NO.6
20150601	从“工业4.0”看工业计量的未来	李少壮,张泽光,李洪波,张学涛,李伟	2015,35(6):-
20150602	The View of Development of Both Theory and Technology About Measurement and Calibration in Big Data Time	梁志国	2015,35(6):-
20150603	Research on Manufacture of Sapphire Fiber Grating Used in High-temperature Measurement	吴天,隋广慧	2015,35(6):-
20150604	Influence of Raman Laser Phase Noise on the Measurement Resolution of Atomic Gravimeter	季俊云,王宇	2015,35(6):-
20150605	On-site Calibration of Phased Array Radar Antennas Based on Optical Technology	盛永鑫,田晓光	2015,35(6):-
20150606	Numerical Simulation on the Flow Field in Contraction Section of Precision Water Flume and Evaluation About the Contraction Curves	王星,沈雪,田于逵	2015,35(6):-
20150607	Design of a Big Thread Parameters Database and Measurement Software	梁海龙,佟岩,杨磊	2015,35(6):-
20150608	Study on a Device for Measuring the Straightness of Straight Edge	乔丽,杨磊,米雪	2015,35(6):-
20150609	Research and Design on Verification Device of the Measuring Force of Goldmann Applanation Tonometers	张忠立,张进明,洪扁,胡安伦,周毅冰,王灿,章天霈	2015,35(6):-
20150610	Design and Implementation of Thermotechnical Metrological Verification Vehicle in Oil Field	孟亮,叶炎	2015,35(6):-
20150611	Discussion on Scanning Electron Microscopy Calibration Method	张欣宇,凌珊,封小亮,沈小艳	2015,35(6):-
20150612	A Rapid Detection Method and Uncertainty Analysis of Angle Errors	孙斌,李云玲,卜雄洙	2015,35(6):-
20150613	Measurement Methods of Oil Thread Gauge Thread Height Truncated Parameters	刘浩,张伟,李文娟,张杰辉,张婧	2015,35(6):-
20150614	Analysis of Problems Field Calibration of Ship Pressure Gauges	张新勤,沐阿华	2015,35(6):-
20150615	Discussion on Verification Method of Nonlinearity of 300 Scale Division Precise Pressure Gauges	赵本义,陈钦碧,吴璋	2015,35(6):-
20150616	Research on Civil–military Integration of In-depth Development in Metrological Support of Armament	寇琼月,周睿,吕石,任伟	2015,35(6):-
20150617	Research on Civil–military Integration of In-depth Development in Metrological Support of Armament	寇琼月,周睿,吕石,任伟	2015,35(6):-