基于MAX1452的硅压阻压力传感器数字补偿设计与拟合分析
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Design and Fitting Analysis of Digital Compensation Method of Silicon Piezoresistive Pressure Sensor Based on MAX1452
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    随着现代科学与技术的高速发展,高精度传感器的应用日趋成熟。MAX1452作为一种高度集成的模拟传感器信号处理器,具有16引脚SSOP封装、全模拟信号通道、低功耗、温度范围宽等特点,可用于硅压阻压力传感器的数字补偿。硅压阻压力传感器输出的信号经过MAX1452校准补偿版输出模拟信号,再经过A/D转换器输出数字信号,在这个过程中,MAX1452全模拟信号通道没有引入量化噪声,利用16位DAC实现数字化校正,16位DAC对信号的偏移量和跨度进行校准,实现硅压阻压力传感器的数字补偿。

    Abstract:

    With the modern science and technology high speed developing, the application of high accuracy senor is becoming mature. The MAX1452 is a highly integrated analog-sensor signal processor optimized for digital compensation method of silicon piezoresistive pressure sensor. The MAX1452 is packaged 16-pin SSOP. The MAX1452 provides fully analog signal path, low power consumption and wide-range temperature. The MAX1452 temperature circuit compensation can transforms the signal of silicon piezoresistive pressure sensor into the analog-signal, than the A/D convertor change it into digital-signal. In the whole process, the fully analog signal path introduces no quantization noise in the output signal while enabling digitally controlled trimming with the integrated 16-bit DACS. Offset and span are calibrated using 16-bit DACS, allowing the digital compensation of silicon piezoresistive pressure sensor.

    参考文献
    相似文献
    引证文献
引用本文

姚敏强,曹晓婷,李拉兔.基于MAX1452的硅压阻压力传感器数字补偿设计与拟合分析[J].计测技术,2016,36(4)::
10.11823/j. issn.1674-5795.2016.04.03.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2018-01-15
  • 出版日期:
文章二维码